梁板结构埋入压电片的深度和厚度优化研究

根据梁的弯曲变形理论，以及压电材料的压电效应，对压电复合材料梁结构的应变和应力状态进行了分析。推导了压电材料埋入梁结构时其埋入深度和压电材料本身厚度的优化目标函数。根据优化目标函数，绘制出了在给定的基体材料和压电材料弹性模量比之下，压电材料的驱动力矩随埋入深度和压电材料厚度变化的三维曲面和等高线图，直观地表示出了埋入型压电材料智能结构获得最佳驱动力矩的配置方案。同时也分析了结构和压电材料两者的弹性模量之比对其结果的影响。结果表明，压电材料对于结构的作动力矩与其埋入基体材料的深度、本身厚度以及基体材料和压电材料的弹性模量之比都有着密切的联系。同时将结果也推广到了压电板结构，此时压电材料和基体材料的泊松比时其结果也有一定的影响。     

La_2O_3和WSi_2增强MoSi_2基复合材料的摩擦磨损性能研究

选用MRH-5A型环-块摩擦磨损试验机测定了3种载荷和2种转速条件下La2O3和WSi2增强MoSi2基复合材料在滑动干摩擦时的摩擦磨损性能,采用扫描电子显微镜分析了复合材料磨损表面形貌.结果表明:La2O3和WSi2增强MoSi2基复合材料的抗磨性能优于MoSi2及WSi2/MoSi2材料;当载荷与速度乘积(pv)值小于183.04N·m/s时,La2O3和WSi2增强MoSi2基复合材料的磨损质量损失仅为相同条件下MoSi2的1/4～1/6和WSi2/MoSi2的1/2;这是由于La2O3和WSi2复合增强相存在硬化和韧化协同作用所致;随着pv值增加,La2O3和WSi2增强MoSi2基复合材料依次呈现犁削、粘着磨损和疲劳磨损特征.     

纳米碳管/铝基复合材料的制备及摩擦磨损性能研究

利用粉末冶金法制备纳米碳管/铝基复合材料,研究不同纳米碳管含量对复合材料硬度和稳态摩擦磨损行为的影响,采用扫描电子显微镜观察复合材料的磨损表面形貌,并对其磨损机制进行探讨.结果表明:随着纳米碳管质量分数的增加,复合材料的硬度呈现先增大而后减小的趋势,含质量分数为2%的纳米碳管复合材料硬度比铝增加约80%;复合材料的摩擦系数逐渐降低,磨损率先减小而后增大;含质量分数为1%的纳米碳管复合材料磨损机制为磨粒磨损和粘着磨损,而含质量分数为2%的纳米碳管复合材料以剥层磨损和疲劳磨损为主.     

MULTIPLE SCATTERING AND DYNAMIC STRESS ANALYSIS OF ELASTIC WAVES IN A FIBER—REINFORCED COMPOSITE WITH INTERFACES

Based on the theory of elastic dynamics, multiple scattering of elastic waves and dynamic stress concentrations in fiber-reinforced composite are studied. The analytical expressions of elastic waves in different regions are presented. The mode coefficients of elastic waves are determined in accordance with the continuous conditions of displacement and stress on the boundary of the multi-interfaces. By using the addition theorem of Hankel functions, the formula of scattered wave fields in different local coordinates are transformed into those in one local coordinate to determine the unknown coefficients and dynamic stress concentration factors (DSCFs). The influences of the distance between two inclusions, material properties and structural size on the DSCFs near the interfaces are analyzed. As examples, the numerical results of DSCFs near the interfaces for two kinds of fiber-reinforced composites are presented and discussed. The project supported by the National Natural Science Foundation of China (19972018)     

Low Velocity Response Characteristics of Composite Plate with Embedded Shape Memory Alloy

I. INTRODUCTION Composite materials have been used extensively in aerospace and other industries owing to the factthat they have high speci?c modulus, high speci?c strength, and the capability to be designed andfabricated with greater ?exibility, and ha…     

Hahn-Tsai复合材料的非线性杂交应力有限元方法

成功建立了Hahn-Tsai复合材料模型的非线性杂交应力有限元方程,采用Newton-Raphson迭代法求解结构的非线性位移方程。在迭代过程中,为了提高计算效率可采用简单迭代法由节点位移求解单元应力场。但是,当载荷增加到一定程度以后,非线性应力场由于循环迭代而无法收敛,显然,一般的加速方法不能解决这种循环迭代的发散问题。因此,本文发展了一种确实有效的非线性应力场迭代新方法,在不增加计算工作量的情况下,不仅极大地提高了收敛速度,而且对于较大载荷也能够很好地收敛,从而解决了大载荷下非线性杂交元方法失败的关键问题。数值算例表明该方法是确实可行的。     

激光散斑干涉法测量金属复合引线热膨胀系数的实验研究

本文采用激光散斑干涉法测量微电子金属封装用金属复合引线的热膨胀系数。该方法有很高的测量精度和灵敏度,并对试件形状、尺寸和表面无特殊要求。同时利用光学方法全场测量的优点,使用已知热膨胀系数的金属材料作为标准试件,可减少温度场不均匀分布及微小变化对测试精度的影响,消除了测量光路几何参数导致的系统误差。在相对简单的实验设备下,得到较高精度金属复合引线的热膨胀系数值。该方法可广泛用于各种新材料的热膨胀系数的测定。     

A Cosserat shell model for interphases in elastic media

This study is concerned with the modeling of interphases in elastic media in general, and in composite materials in particular. The aim is to replace a boundary value problem consisting of a three-phase configuration, say that of fiber-interphase-matrix, by a simpler problem which involves the fiber and matrix only, plus certain matching conditions which simulate the interphase. The simplest of such known representations replaces a thin interphase by a “perfect contact interface” (a single surface) across which the displacements and tractions are assumed to be continuous. Another classical model replaces a thin and soft interphase by a “spring-type interface”, across which the tractions are continuous, but the displacement field undergoes a discontinuity. In the present paper, a Cosserat shell model of the interphase is derived which successfully models the original interphase in a unified manner, for the full range of its material parameters relative to those of the neighboring media. The model is derived in the setting of three-dimensional linear elasticity with small deformations and displacements. Comparisons with an existing exact solution of a coated fiber in an infinite matrix show that it performs extremely well even for moderately thick interphases.     

聚酰亚胺复合材料的摩擦性能及其机理研究

研究了含有固体润滑剂的炭纤维增强 PI复合材料在干摩擦和水润滑 2种状态下的摩擦磨损性能及其磨损机理 .结果表明 ,在水润滑条件下 ,摩擦系数和磨损率都有不同程度的降低 ,其中含 PTFE的炭纤维增强 PI复合材料的耐磨性最佳 ,最低磨损率为 9.9× 10 - 7mm3/ N· m.其主要原因可能与材料存在极性酰胺基团有关 ,酰胺基易通过氢键与水分子结合 ,在摩擦表面形成水吸附膜 ,使摩擦表面直接接触减少 ,从而改善材料的摩擦磨损性能     

材料弹塑性性能数值模拟的多尺度方法

将均匀化方法和渐近分析(Asymptotic Analysis)与参变量变分原理相结合提出了一种模拟复合材料非线性性能的多尺度数值方法.该方法用渐近分析建立宏-细观变量之间的联系,利用参变量变分原理计算非线性响应,求解过程采用迭代算法.为提高计算精度,针对Von-Mises准则和Tsai-Hill准则,提出了一个基于参变量变分原理的改进算法,算例表明该方法可以显著消除传统方法采用线性展开式构造线性互补条件所带来的误差.